| ITEM | SPN501 | SPN503 | SPN701 | SPN901 | |||||
| Metric | Inch | Metric | Inch | Metric | Inch | Metric | Inch | ||
| TRAVEL & WORK CAPACITY |
X axis travel (longitudinal table) | 800 mm | 31.5" | 800 mm | 31.5" | 1000 mm | 39.4" | 1500 mm | 59.1" |
| Y axis travel (vertical head) | 750 mm | 29.5" | 750 mm | 29.5 " | 950 mm | 37.4" | 1300 mm | 51.2 " | |
| Z axis travel (column in & out) | 750 mm | 29.5" | 750 mm | 29.5" | 850 mm | 33.5" | 1120mm [1150mm] |
44.1" [45.2''] |
|
| TABLE | Table working surface | 500 x 500mm | 19.7 x 19.7" | 500 x 500mm | 19.7 x 19.7" | 630 x 630mm | 24.8 x 24.8" | 800 x 800mm | 31.5 x 31.5" |
| Table increments | 1¡ë[0.001¡ë] | 1¡ë[0.001¡ë] | 1¡ë[0.001¡ë] | 1¡ë[0.001¡ë] | 1¡ë[0.001¡ë] | 1¡ë[0.001¡ë] | 1¡ë[0.001¡ë] | 1¡ë[0.001¡ë] | |
| Maximum mass on pallet | 600 kg | 1320 lbs | 600 kg | 1320 lbs | 1200 kg | 2640 lbs | 2000 kg [2500kg] |
4400lbs [5500 lbs] |
|
| SPINDLE | Spindle speeds | 12,000 min-1 |
12,000 rpm |
10,000 min-1 |
10,000 rpm |
12,000 min-1 | 12,000 rpm | 8000 min-1 | 8000 rpm |
| Spindle drive motor | AC30/25kW | AC40/34HP | AC30/25kW | AC40/34HP | AC30/25kW | AC40/34HP | AC30/22kW | AC40/29.5HP | |
| Spindle max. torque | 420Nm | 310ft.lbs | 420Nm | 310ft.lbs | 420Nm | 310ft.lbs | 600 Nm | 443 ft.lbs | |
| Spindle taper | No.50 | No.50 | No.50 | No.50 | No.50 | No.50 | No.50 | No.50 | |
| FEEDRATE | Rapid traverse X, Y, Z axis | 60 m/min | 2362 ipm | 50[61]m/min | 1968[2400] ipm | 60 m/min | 2362 ipm | 50 m/min | 1968 ipm |
| AUTOMATIC TOOL CHANGER (ATC) |
Tool magazine capacity | 60 | 60 | 62 [88/128] | 62 [88/128] | 60 | 60 |
60[118] | 60 [118] |
| Matrix type | [126/178/230] | [126/178/230] | N/A | N/A | [126/178/230] | [126/178/230] | [126/178/230] | [126/178/230] | |
| MAXIMUM WORK PIECE | Swing diameter inside machine | ¦µ800mm | ¦µ31.5" | ¦µ800mm | ¦µ31.5" | ¦µ1100mm | ¦µ43.3" | ¦µ1750mm | ¦µ68.9" |
| Height | 1000mm | 39.4" | 1000mm | 39.4" | 1200mm | 47.2" | 1400mm | 55.1" | |
Figures in [ ] indicate optional features.