| Items | Unit | MD50X | MD75X | MD100X | |||||||||
| Injection Capacity |
T.m |
i 0.7 | i 1.0 | i 1.7 | i 2.7 | ||||||||
| Screw Type (Option) |
Y (OP) |
YA | A | B |
Y (OP) |
YA | A | B |
Y (OP) |
YA | A | B | |
| Screw Diameter | mm | 18 | 22 | 25 | 30 | 25 | 28 | 30 | 35 | 30 | 32 | 35 | 40 |
| Shot Mass(PS) | g | 20 | 35 | 45 | 65 | 54 | 68 | 78 | 106 | 91 | 104 | 124 | 162 |
| Max. Injection Pressure | MPa | 280 | 250 | 200 | 140 | 280 | 230 | 200 | 150 | 270 | 240 | 200 | 155 |
| Max. Holding Pressure | MPa | 280 | 230 | 180 | 125 | 260 | 210 | 180 | 135 | 245 | 215 | 180 | 135 |
| Max. Injection Speed | mm/s | 250 | 250 | 260 | |||||||||
| Plasticizing Capacity(PS) | kg/h | 9 | 18 | 27 | 43 | 27 | 36 | 43 | 60 | 43 | 51 | 60 | 88 |
| Clamping Force | kN | 500 | 750 | 1000 | |||||||||
| Tie-bar Distance(H x V) | mm | 320X320 | 360X360 | 410X410 | |||||||||
| Mold Opening Stroke | mm | 250 | 300 | 350 | |||||||||
| Mold Height (min./max.) | mm | 160/370 | 170/410 | 200/450 | |||||||||