Table rotation performance which realizes the high cycle molding (MDVR) Low-speed and low-pressure molding is also simply realized Smooth and shockless type switching action The improvement in the operability by low table height, three-way free space
	The AC servomotor is adopted in all shafts of injection, supply, clamping and ejector table rotating and table period of rotation moves in 1.5 seconds, moreover in the rotating start and stop, since it moves smoothly no shock and there is no slippage of the insert work, it realizes the cycle shortening. It is the machine which is more optimum for the molding of thin wall dick piece IT related parts .
Items Unit MDVR30S-IV MDVR50X MDVR75X Injection Capacity T.m i 0.7 i 0.8 i 1.4 i 1.7 Screw Diameter(Option) mm 18(op) 22 25 18 22 25 30 30 35 30 35 Shot Mass(PS) g 20 30 38 20 30 38 55 65 89 65 89 Max. Injection Pressure MPa 280 200 155 280 250 200 140 200 150 235 175 Max. Holding Pressure MPa 270 180 140 280 230 180 125 180 135 210 160 Max. Injection Speed mm/s 150 250 250 250 Plasticizing Capacity(PS) kg/h 6 12 18 9 18 27 44 43 60 43 60 Clamping Force kN 300 500 750 Mold Opening Stroke mm 150 200 250 Mold Height (min./max.) mm 170 / 270 150 / 300 220 / 320 Table Diameter mm 940 1060 1206 Maximum Mold Attached Stage mm 300 x 300 365 x 365 420 x 420
Items Unit MDVR100X MDVR150X Injection Capacity T.m i 2.2 i 2.2 i 5.7 Screw Diameter(Option) mm 35 40 35 40 40 45 52 Shot Mass(PS) g 102 133 102 133 208 263 352 Max. Injection Pressure MPa 200 155 200 155 250 200 140 Max. Holding Pressure MPa 180 135 180 135 250 180 125 Max. Injection Speed mm/s 260 260 150 Plasticizing Capacity(PS) kg/h 61 89 61 89 85 111 171 Clamping Force kN 1000 1500 Mold Opening Stroke mm 280 300 Mold Height (min./max.) mm 250 / 350 300 / 400 Table Diameter mm 1340 1550 Maximum Mold Attached Stage mm 460 x 460 500 x 500